Baby Kiffer Kit
Smoka Baby Kiffer is much smaller than Smoka Kiffer Kit, fits comfortably in the palm and has a very convenient grip. With a 2200 mAh built-in device with no redundant monitor screens and settings. Screw in your steamer, press the button and fry. The device is lightweight and with a pleasant hand feel.
Dimensions: 42 x 27 x 62.5 mm
2mL e-liquid capacity
Maximum Output Wattage: 22 V
Range of resistance: 0.2 – 3.0 Ohm
Charging: Micro USB DC 2 V
Battery Capacity: 2200 mAh
Five clicks of the fire button to lock/unlock
Vaping using Baby Kiffer
Simply connect a properly powered MicroUSB cable to the ‘input’ port on the Rage Micro USB port.
ON: Press the fire button 5 times in quick succession to turn Baby Kiffer on, the indicator light with flash.
OFF: Press the fire button 5 times in quick succession to turn Baby Kiffer off, the indicator light with flash.
The Baby Kiffer battery level status is displayed via the light level at the bottom of fire button.
How to refill the Prism Atomizer/Tank:
1) Unscrew the Top Cap 2) Fill Against Side of Tank. 3) Wait 5 Minutes before Vaping. CAUTION: Do not vape if low on eliquid 4)Stop if there is a burnt taste. 5) Replace the coil if there is reduced flavor or vapor. 6) Hold top cap and unscrew it from the tank.
Vape while charging
When plugged into a power source the Baby Kiffer vaporizer can be vaped and charged at the same time with ‘Vape while charging’ pass-through technology.
Unscrew the top cap anti-clockwise and refill against a side of thank. For the new coil, please wait for 10 minutes to let the coil fully wetted before using the device.